Continuous Innovation in LED Lighting Technology

Our ANP HighPro™ LED by Sansi® and Modular LED solutions by Cree® are innovative, self-contained systems that deliver flexibility and maintained performance.

Our LED systems also provide:

  • Far better overall illumination at much lower light levels than HID for less uncomfortable glare
  • Much better visual acuity at high CCT (corrected color temperature) than HID
  • Input Watts equal to Lamp Watts – HID input Watts greatly exceed Lamp Watts
  • Better overall illumination at lower light levels than HID for less glare
  • Better visual acuity at high CCT than HID
  • Cooler CCT for better night vision
  • Better vertical foot candles
  • Better facial recognition

ANP HighPro™ LED Towers and Platforms

We use LED engines by Sansi to optimize light distribution and thermal management in each lighting fixture. The precise optic on the engine directs light where it is needed reducing glare and light pollution. Our optics allow wider spacing between fixtures equating to fewer fixtures on the project and lower installed cost. The patented pixel heat sink design facilitates convection at the LED source and eliminates the need of extra heat sink material. We are able to drive the engine at low current, ultimately providing higher lumen output, longer LED life, and superior optical performance.

ANP HighPro LED Specifications

  • Efficacy up to 115 lumens per watt
  • 2700K, 3500K, 4000K and 5000K
  • Precision individual lens for Type II, III or V Light Distribution
  • Shatter-resistant lens material
  • Highly transparent, non-yellowing lens
  • Wider fixture spacing and lower installed cost
  • L70 60,000 hours tested at up to 105C @ 1000mA (per Nichia 219B LM-80)
  • 400 mA operating current
  • IP65 or IP66
  • Dimming to 10%
  • Driver efficiency greater than 90%
  • Easily upgraded to future LED technology

Sansi Engine Specifications

Nichia LED Chip Specifications

Modular LED Solutions by Cree

Our modular LED solutions by Cree provide economical sources of illumination in a compact package. With a superb color rendering index of 90 plus, these modular light engines are an excellent choice to replace incandescent, compact fluorescent, ceramic metal halide, or high-pressure sodium light sources. Life of the LED system is three to 10 times longer than these sources. Selectable narrow and wide beam options are available for order to tailor light distribution to your application and provide the proper distribution for the application.

Cree Module Specifications

  • Used in RLM and architectural products where lower mounting heights and/or lower wattages are required.
  • Efficacy up to 108 lumens per watt
  • 2700K, 3000K, 3500K and 4000K
  • Narrow and wide beam distribution
  • L70 50,000 hours
  • CRI >90
  • Dimming to 10%
  • CREE 2700K "sunset dimming" replicates warm incandescent dimming